Alex Krulikowski

Introduction In May of 2020, I conducted a survey to find out which versions of the Y14.5 standard is dominant in various ...

Rick Hughes

This article on GD&T was written by Rick Hughes, a friend of mine from the ASME standards community. Rick was kind enough to ...

Introduction. A few weeks ago, I surveyed on the interpretation of size dimensions based on Y14.5.  I posted the survey on several group ...

Part 3 - Tips on creating and implementing an addendumIntroductionWelcome to part three of the article on addendums. It covers a few ...

Introduction.  A few weeks ago, I surveyed on whether the ISO GPS or ASME Y14.5-2009 standard is more widely used on drawings ...

Introduction This part of the article on addendums to Y14.5 covers the five categories typically found in an addendum.Throughout this article where ...

About this article... This article consists of three parts. The first part discusses whether using an addendum to the Y14.5 standard is ...

Alex Krulikowski

IntroductionDo you know which defaults from the ASME Y14.5 standard apply to your drawings? To correctly read a drawing, you must be able ...

Alex Krulikowski

Why depend on casual peer translations when you can have a professional translation of the entire Y14.5 -2009 standard? If you have ...

Alex Krulikowski

About a month ago I conducted a survey to determine how industry interprets one aspect of the Y14.5 2009 standard. I wanted ...