This part of the article on addendums to Y14.5 covers the five categories typically found in an addendum.
Throughout this article where a number appears between square brackets, e.g. [xx], it refers to the paragraph or figure that is being modified from the ASME Y14.5-2009 standard.
There are five categories of content commonly found in corporate addendums.
1. Allow the use of only one of several optional methods.
2. Change a default condition.
3. Clarify a concept, symbol, modifier, or definition for your companies' application.
4. Discourage/disallow the use of a concept, symbol, or modifier.
5. Document the use of a tolerancing practice that is not in the Y14.5 standard toolbox.
Examples of modifications in each content category are in the paragraphs below. Corporate addendums may include many or just a few modifications. This article contains a few examples of modifications that are common in addendums.
The format of an addendum varies in each company. The format shown here may not be optimal for your company.
The examples in this article are not arranged in the sequence of a typical addendum. The examples are grouped by category.
This content category is popular in addendums. Selecting an option when several practices are permitted in the Y14.5 standard is important because it helps to create consistent drawings and reduce confusion.
The list below contains a few examples of selecting an option from the Y14.5 standard.
In most cases default conditions are not revised in an addendum; they are addressed on the face of a drawing. What should be in an addendum is a list of which defaults should be overridden on your drawings and instructions on how to override them.
Changing a default can be beneficial because the default may not be the best for your company. For a list of common defaults in the Y14.5 standard, check out the blog article "Do you know which ASME Y14.5-2009 defaults apply to your drawings?") Click here to read the defaults article
If the default conditions are not the same for all types of parts in your company, the addendum should show what parts should have defaults overridden and how to denote the override condition.
The advantage of revising standard defaults on the face of a drawing is that the requirement or condition is visible to the drawing users.
Clarifying concepts from the Y14.5 standard is important because it reduces confusion by providing additional explanation of items that are not fully explained in the standard.
The list below contains a few examples where clarifying a concept from the Y14.5 standard could be in an addendum.
Each ASME standard contains a paragraph citing a list of additional standards it invokes and provides a method to determine which standards are partially invoked.
However, many companies have difficulty understanding exactly which standards, and which versions apply to their drawings.
Discouraging or disallowing the use of a symbol or concept is important because it reduces the number of tolerancing tools available for use on drawings. There are many tolerancing tools in the Y14.5 toolbox that are not needed for some types of parts. There are also tolerancing tools that are not used often.
There are subtle differences between some of the GD&T symbols. There are often discussions over which symbol is better for an application. The addendum focuses the discussions by disallowing or discouraging certain tolerancing tools leaving the tolerancing tools needed for defining your products.
Tolerancing tools can be disallowed for a variety of reasons. A few tolerance tools are overly restrictive for most applications or are not a good tool for your companies' applications. A few tolerancing tools that are only used in rare applications may be disallowed or discouraged to prevent their widespread use.
The list below contains a few examples of disallowing or discouraging a concept, symbol, or modifier.
Another area that I recommend companies to address is to discourage "extension of principle" on their drawings when a tolerance application is not in the Y14.5 standard or in their addendum. Even though the extended principle may make sense to the drawing creator, since its interpretation is not documented, it can be interpreted differently by drawing users.
Documenting the use of a symbol or concept that is not covered in the Y14.5 standard is important. It helps drawing users to have a consistent interpretation of the drawing requirements. If you add a new symbol or concept, it should be fully explained from a functional and inspection standpoint.
The list below contains a few examples of tolerancing tools that are not in the Y14.5 standard but may be needed. In this section, only example topics are listed, the entire addendum text and figures to fully describe these items are too lengthy for this article.
Adding new tolerancing tools in your addendum should be used sparingly. Adding new tolerancing tools can cause problems for CAD, analysis, and inspection software.
In part two, we looked at each of the five content categories of corporate addendums. Each corporate addendum is different based on their unique situation. Every addendum will not address all five of the above categories. An addendum may also include additional information not discussed in this article.
Part three of this article will be posted next week. In part three, you will learn a few tips on creating and implementing an addendum in your organization.